 |
| Place of Origin: | China |
| Brand Name: | prodhcmea |
| Minimum Order Quantity: | 100kgs |
|---|---|
| Price: | negotiate |
| Packaging Details: | plastic bag and carton |
| Delivery Time: | 3-10 days |
| Payment Terms: | T/T |
| Type: | Release Film | Hardness: | Soft |
|---|---|---|---|
| Transparency: | Opaque | Material: | Ptfe |
| Usage: | Anticorrosive Film | Feature: | Heat Resistance |
Chinese Super Thin PTFE film 0.01x1500mm
Detailed Description:
Performance Characteristics:
Outstanding chemical resistance
Extremely low friction
Soft and formable
Good bearing and wear properties
Good weathering resistance
Performs well at elevated temperatures
Specification: Custom sizes and colors available upon request
Note: If you need any products of ours, please kindly contact with us directly by following contaction . Then we can reply you faster and easy . Thanks
Application:
Seals and gaskets / Valve and fitting components / Pump parts / Manifolds / Semiconductor equipment / Scientific equipment / Medical equipment / Chemical resistant tubing / Bearings and bushings
PTFE Film Features
Self lubricating
Long durability
Maintenance free
Non-contaminating
High chemical resistance
High temperature resistance
2.PTFE Film Advantages:
-Superior endurance in corrosion
-Superior endurance in seasonal change
-Non-flammable, limited oxygen index is under 90.
-Low friction coefficient
-Non-viscous
-Superior endurance in high&low temperature, can be used -190~260°C.
-High electricity insulation
-High electricity resistance coefficient
-Self-lubricating
-Atmospheric aging resistance
-Radiation-resistant properties and low permeability
3.PTFE Film Applications
Bearings Cell lids Insulators Seal rings Wear rings Valve seats Friction pads
PTFE is available in a variety of formulations including unfilled and filled grades with sheet, rod, tube and bar also bespoke m
Remark: PTFE are available as films with thicknesses of 3mm or less (1m width)
Packing:Carton cases or according to customer’s requirements
Typical Properties:
|
|
UNITS |
ASTM TEST |
PTFE |
|
Tensile strength |
psi |
D-638 |
1,500-3,000 |
|
Flexural modulus |
psi |
D-790 |
72,000 |
|
Izod impact (notched) |
ft-lbs/in of notch |
D-256 |
3.5 |
|
Heat deflection temperature @ 66 psi |
°F |
D-648 |
250 |
|
Maximum continuous service temperature in air |
°F |
|
500 |
|
Water absorption (immersion 24 hours) |
% |
D-570 |
<0.01 |
|
Coefficient of linear thermal expansion |
in/in/°Fx10-5 |
D-696 |
5.5 |
|
Coefficient of friction (dynamic) |
|
|
0.10 |
Size:0.01mm to 2mm Max width 1000mm
