 |
| Place of Origin: | China |
| Brand Name: | HD |
| Model Number: | Kynar PVDF |
| Minimum Order Quantity: | 10pcs |
|---|---|
| Delivery Time: | 4 days |
| Payment Terms: | T/T |
| Supply Ability: | 10000pcs |
Kynar PVDF Gas Sampling Bag
Our PVDF gas sampling bags are made of 3 mil KYNAR® film. KYNAR® film is strong, durable, and has excellent chemical inertness. It can be used a wide range of gas sampling applications.
Features:
* excellent chemical resistance
* strong physical property
* superb strength and low permeability
Standard Kynar PVDF Gas Sampling Bag Sizes:0.5L,1L,2L,3L,4L,5L,8L,10L,15L,20L,30L,and 40L or customized size.
Note: if you need any products, please kindly contact with us directly by email,not leave message here. Then we can get your email soon and reply you .
thanks for your understanding !
Connectors
Side-opening stopcock valve
It has similar functions to the stopcock valve . The difference is the connector it horizontal to the surface of bag. The sampling cap is opposite to the connector. This patented design is convenient for filling and sampling gas.
PTFE straight valve
It is made of polytetrafluoroethylene (PTFE). The patented design utilizes mouldeling, self-sealing mechanism, no O-ring is inside therefore cross-contamination is eliminated. The PTFE valve can handle gases that there is not corrosive to PTFE. The valve can be used in VOCs analysis.
PTFE straight valve plus fitting
It is made of polytetrafluoroethylene (PTFE). The patented design utilizes mouldeling, self-sealing mechanism, no O-ring is inside therefore cross-contamination is eliminated. The PTFE valve can handle gases that there is not corrosive to PTFE. The valve can be used in VOCs analysis.
Stopcock straight valve
It's made of medical grade polycarbonate (PC) with 6mm connector. Valve stem (connector) is vertical to the surface of film. The valve utilizes patented technology.
The valve body and cock are modeled and polished so that the valve does not need lubricant and sealing part, the crosscontamination is eliminated.The valve not only has on/off function but also can control flow rate. When turn handle toward the connector, the valve is open. The valve is closed when the handle is turned vertically to the connector. The crewed connector has cap with silicone septum in it, which is convenient for sampling. Since the valve does not introduce any potential contamination, it can be used for VOC analysis.
Operating instructions for PVDF bag
1.Avoid filling pressure higher than 6000Pa. Fill gas until the bag is fully expanded, however, it is not so tense when you press it using your finger.
2.Keep away from flame and high temperature when filling and storage. Avoid contacting sharp stuff.
3.Before use, flush sampling bags three times with the gas you want to fill.
4.When using a needle to draw gas from highly elastic septum, squeeze the septum with fingers in order to restore the sealing property after pulling out the needle.
5.Heat-resisitance temperatures should be 150°C to 170°C .
Operating instructions for PVDF bag
Detailed introduction
Our PVDF gas sampling bags are made of 3 mil KYNAR® film. KYNAR®film is strong, durable, and has excellent chemical inertness. It can be used a wide range of
gas sampling applications.Our PVDF gas sampling bags can maitain compositions of some gases stable at ppm or ppb level.Our KYNAR® PVDF gassampling bags come with renovated, patented valves. Valve materials are polycarbonate and PTFE. Unlike other popular valves, our valve does not have O-ring inside to prevent leakage so contamination is minimized.
