PFA Joint

 PFA joint

  Usage:

•  LCD manufacturing equipment
• Single fiber light-emitting whole body single-ended tube
• Heat exchangers, steam piping
• High-purity reagents Pipeline
• A variety of corrosive media (harsh solvents) pipeline
• Submersible motor with a slot insulation tube
• Air-conditioning control wiring harness assembly,
• All-inclusive fluoride O-ring plastic tube

Note: If you need any products of ours, please kindly contact with us directly by following contaction . Then we can reply you faster and easy . Thanks

2) Utilization Characteristics:

• High and low temperature
• -200 ~ 200 °C high temperature
• Not sticky, water fight, fight oil
• Electricity reliability, high insulation
• 60HZ-60MHZ both high and low temperature dielectric constant 2.1.
• Even if the surface due to flash over and the damage it does not produce conductive tracks.
• Volume resistance> 10¹⁸Ωm
• Surface resistance> 2 X 10¹³Ω
• Arc> 165 seconds without leakage
• Corrosion resistance
• Only high temperature element fluorine, alkali metals and it works on all the other thick, dilute inorganic acids, alkalis, esters had no effect.
• Low water absorption
• Low suction rate of <0.01%
• Incombustibility
• The air will not burn. (Oxygen index> 95vol.%)
• No toxic
• With physical inertia
• Transparency
• Optical refractive index in the lowest of all plastics
• Weatherability
• Can be prolonged exposure to ozone, the sun
• Easy processing of secondary
• Can be self-appointed, self-welding can be flange, it can be set to control

Welcome OEM .