|Place of Origin:||China|
|Minimum Order Quantity:||100kgs|
|Packaging Details:||plastic bag and carton|
|Delivery Time:||3-10 days|
|Payment Terms:||T/T Prepaid|
PFA resin , PFA raw material , PFA granule
Polyfluoroalkoxy resin (PFA) is the copolymer of TFE and PSVE ,with good thermal stability,outstanding chemical interness,good electrical insulation,and low coefficient of friction, enabling extrusion, blow molding, injection molding and other general thermoplastic molding for processing methods.
|Appearance||Translucent particle, with impurities such as metle debris and sand,containing visible black particles percentage point less than 2%|
|Melt Flow Rate(372℃/5kg)||g/10min||0.8-2.5||2.6-6||6.1-12||12.1-16||16.1-24||>24.1|
|Standard Relative Density||g/m3||2.12-2.17|
|Elongation at break(23℃)≥||%||300||300||350||350||350||350|
|water absorption, <||%||0.01|
DS702: mainly for pumps,valves,piping and lining, mebrane,joint and some bearing.DS701: mainly used for wire insulation layer,tubes,film,and so on.DS700: Extrusion processed for generic type resin,mainly used for wire insulation layer, Multi-core cable sheath and so on.DS708: Mainly for aviation, aerospace and chemical industry, high-speed extrusion wire and cable, It is more economical when used in where no high stress cracking resistance is required.
Note: If you need any products of ours, please kindly contact with us directly by following contaction . Then we can reply you faster and easy . Thanks